If you are serious about cleaning the surfaces
of your house, you can select any one between pressure washing and water
blasting techniques. But to pick one, you need to clarify what surfaces you are
planning to clean, where will you be cleaning and how long will you take to
clean them?
Mentioned below are the key differences between
pressure washing and water blasting that will help you answer the above
questions with ease and will also help you make the correct choice between the
two, based upon your requirement.
Pressure washing typically comprises of a pump, usually driven
by a gas or electric motor. It comprises of a series of wands, hoses and various
nozzles that are used to transfer the pressure boosted water.
The water spray nozzles are generally supplied
with varying degrees of the fan patterns. The narrower the fan, the higher
would be the water pressure. It consists of a jet nozzle, which is a straight
stream and in fact it is the highest pressure stream that your unit will be
capable of delivering.
In order to clean out the regular surfaces,
make use of the broader fan nozzles. These nozzles are utilized to simply
amplify the existing water line pressure to the point where the force of the
blast is sufficient to displace the dirt. The type of nozzle you select and the
power of your washer are used to determine the exact distance you should hold
your wand and nozzle from the surface to be cleaned in order to have an
aggressive and powerful spray.
Water Blasting
When you want some serious surface treatment via
high pressure, it is here that water blasting comes in. The technique of water
blasting involves the removal of a thin layer of a material along with the
dirt. You can achieve outstanding results by selecting a suitable nozzle and
rightly directing the altitude of the water fan towards a selected spot. But in
case you fail to adhere to the correct technique, then you would have to face
certain unwanted results.
Water blasting requires you to precisely follow
the technique in order to avoid the undesirable results. If you dwell for too
long into a single place, then there are chances that you’ll need to replace
the divots. Plus, you also need to make sure that the broad face of the fan is
always kept perpendicular to the direction of the surface being cleaned.
Maintain a constant distance from the surface while maintaining a uniform
motion moving from left to right and taper the starts and stops of the spray as
it comes in contact with the surface.
You need to concentrate a lot on the technique
because if you start or stop over the surface or hold the wand at the wrong
angle, you can face unwanted and unsightly scars on your surface. Therefore you
should always prefer hiring water
blasting professional in Auckland, who’ll make the process much
simpler for you.
Note
As both the methods of pressure cleaning and water
blasting require special attention and correct technique therefore you can hire
professional. Many service providers involved with residential painting in
Auckland offer such services, make sure to contact experts only.
Author Bio:
Jon
Ferris runs his own roof cleaning services in
Auckland. He likes to share his experiences and expert views on roof cleaning
through blog writing.
Thank you for sharing! This article is so helpful and informative; I hope your article can inspire more people, like it did to me. To remove algae or any dirt faster and safer, you can use water blaster.
ReplyDeleteThank you for sharing! This article is so helpful and informative; I hope your article can inspire more people, like it did to me. To remove algae or any dirt faster and safer, you can use water blaster.
Thank you for sharing! This article is so helpful and informative; I hope your article can inspire more people, like it did to me. To remove algae or any dirt faster and safer, you can use water blaster.
Precision Water Blaster